Installation

Step 1 – Clean and dry the surface before application. You can use any cleaner that will not leave a film or oily surface. Our recommendation is to use alcohol prep pads. Make sure the area you are mounting your screen to is free from peeling paint, protruding nails, or loose wood. 

Step 2 – Unroll screen and hold it up to where you would like to mount it, about 1 inch above your frame opening. You may want to pencil a line across the top of your door and down each side so you can have a guide for attaching the hook fastener. Make sure
your screen will not interfere with your door opening and closing.

Step 3 – Put the screen aside for now and take self adhesive fastener tape and unroll about 1 foot at a time. Pull back transparent tape and press hook fastener to your mounting surface about 1 foot at a time.

Note: You may want to start at the top corner of your mounting surface first then follow along each side.

Step 4 – It is a good idea to let the self-adhesive fastener cure for 24 hours to achieve maximum adhesion. You may want to staple or nail through the self –adhesive fastener
to increase the holding strength. (use nails or staples that will not rust)

Step 5 – Unroll screen and start at either top corner pressing the screen on to the hook fastener you have mounted and then continue down each side.